ATEX Pressure Transmitter

      SOR explosion proof ATEX Pressure Transmitters are designed for the rigours of hostile environments and hazardous locations when space is limited. The variety of features and communication protocols, in addition to innovative sensor technology, make these instruments an ideal low cost, discrete and continuous monitoring choice.

      805PT ATEX Pressure Transmitter

      805QS EXPLOSION PROOF PRESSURE TRANSMITTERS
      805qs EXPLOSION PROOF PRESSURE TRANSMITTERS

      Models: 805PT
      Ranges: 0-5 psi to 0-30,000 psi (5:1 turndown)
      Certifications: Unit: ATEX, CRN, Dual Seal (Canada), FM (US and Canada), INMETRO
      Warranty: 3 Years

      The loop-powered 805PT ATEX pressure transmitter is built tough to provide “set it and forget it” reliability in oil and gas production casing and tubing applications. The 805PT pressure transmitter was designed to stand up to the rigors of hostile environments and hazardous locations where space is limited. It is best suited to oil and gas applications such as wellhead and compressed station monitoring.It is ideal for applications where low-cost, continuous pressure transmitter monitoring is preferred. Zero and span are adjusted via SOR Calibration Manager software which is included in the optional Calibration Kit for the pressure transmitter.A Dual Seal option is available for our pressure transmitters.

      • Compact, 316SS, hermetically sealed enclosure
      •  4-20 mA or 1-5 VDC outputs
      • 0.25% accuracy
      • Explosion-proof
      • EMI/RFI protection
      • NEMA 4X
      • Local Indicating Display option available
      • Response Time of Continuous Output is <= 5 ms
      • Absolute Pressure range options

      Datasheet

      Ready to find out more?

      Drop us a line today for a free quote!

      805QS ATEX Pressure Switch-Transmitter

      805QS EXPLOSION PROOF PRESSURE TRANSMITTERS
      805qs EXPLOSION PROOF PRESSURE TRANSMITTERS

      Models: 805QS
      Ranges: 0-5 psi to 0-30,000 psi (5:1 turndown)
      Certifications: Unit: ATEX, CRN, Dual Seal (Canada), FM (US and Canada), INMETRO
      Warranty: 3 Years

      The rugged, loop-powered 805QS ATEX pressure switch-transmitter provides “set it and forget it” dependability in mid and upstream oil and gas production applications. The 805QS pressure switch-transmitter works well in adverse environments and hazardous locations where space is limited. The 805QS is built tough and works well in applications where low-cost, discrete and continuous output monitoring is preferred. Switch set points and zero/span are all field adjustable via the optional SOR Calibration Kit with USB communication cable.

      • Compact, 316SS, hermetically sealed enclosure
      • Stainless Steel sensor, no O-ring
      • Solid State Relay output
      • 4-20 mA or 1-5 VDC output
      • 0.25% continuous output accuracy
      • Explosion-proof
      • EMI/RFI protection
      • NEMA 4X, IP 66 housing
      • FM and ATEX certified for hazardous locations in the U.S., Canada and Europe
      • Dual Seal version available
      • Local Indicating Display option available
      • Response time of Continuous output is <= 5 ms
      • Response time of Solid State Switch output is typically <= 5 ms
      • Absolute Pressure range options

      Datasheet

      Ready to find out more?

      Drop us a line today for a free quote!

      815PT  Smart ATEX Pressure Transmitter

      815PT EXPLOSION PROOF PRESSURE TRANSMITTERS
      815PT Smart Pressure Transmitter

      Models: 815PT
      Ranges: 0-5 psi to 0-30,000 psi (5:1 turndown)
      Certifications: Unit: ATEX, CRN, Dual Seal (Canada), FM (the US and Canada)
      Warranty: 3 Years

      The 815PT smart ATEX pressure transmitter is a rugged, compact, loop-powered instrument that is ideally suited for hazardous locations and hostile environments where space is limited. The 815PT offers many industry-standard outputs to meet applications where low-cost, discrete and continuous monitoring is required or preferred.

      The 815PT is easily configured using HART®7 Communication Protocol and Modbus RTU Serial Communications or when setting the zero and span set points with a magnet.

      • HART®7 communication protocol with 4-20 mA output
      • 1-5 VDC (low-power) mode of operation output
      • Modbus RTU (RS-485) serial communications
      • Configurable normally open solid-state switch output (SPST)
      • +/-0.10% (URL) continuous output accuracy
      • Compact, 316 stainless steel, explosion-proof housing
      • Local Indicating Display option available
      • Hermetically sealed leads
      • Zero and span magnetic targets located on casting
      • EMC (EMI/RFI) protection
      • NEMA 4X, IP66 housing
      • FM and ATEX certified for hazardous locations in the U.S., Canada and Europe
      • Dual Seal approval available
      • Absolute Pressure range options

      Datasheet

      Ready to find out more?

      Drop us a line today for a free quote!

      SOR Calibration Kit for the 805PT and 805QS Transmitters

      Cal-Kit-Parts-300x300

      The Calibration Kit includes a SOR Calibration Interface (USB communication cable included) and SOR Calibration Manager software that allows the user to verify, adjust and re-calibrate a device from scratch to implement turndown and zero offset, or adjust the zero output of a device to account for environmental effects. This is for use with the 805 Series of pressure products, specifically the 805PT pressure transmitter and the 805QS electronic pressure switch. A software CD is included in the kit and the software (Version 4.0.0.0) can be downloaded. Please call us at 913-888-2630 to purchase the kit.

      Features and benefits include:

      • Zero offset and turndown data retention
      • “One-button” archive with all calibration results
      • Manual zero adjustment
      • Fast calibration

      When connected to a device the application window will display the configuration information about the device, such as the product name, product model, unit serial number, signal output type (4-20mA or 1-5V), and the calibrated Zero and Span set points for that device.

       

      SOR Calibration Manager Connection

       

       

      Datasheet

      Ready to find out more?

      Drop us a line today for a free quote!

      Certifying Agencies

      ATEX (certified by Baseefa, DEMKO, or KEMA)

      CE

      CSA

      FM

      GOST

      IECEx (certified by Baseefa or Standards Australia)

      INMETRO

      PESO (CCOE – India)

      TIIS

      KOSHA

      Rostechnadzor (RTN)

      SIL, TestSafe (SAA – Australia)

      SASO

      UL

      Available Listings

      Ordinary Locations and Hazardous Locations
      SIL Level Switch Certificate
      SIL Pressure Switch Certificate

      Available Hazardous Locations Protection Methods

      Explosion Proof/Flameproof (d)
      Intrinsic Safety (ia)
      Encapsulation (m)
      Special Protection (s)
      Combustible Dust (tD)
      Energy Limited (nL)

      Division 1, Division 2
      Class I, Class II, Class III
      Groups A-G

      IECEX
      saso
      INMETRO
      kosha
      gost
      PESO
      Testsafe
      atex-certification
      FM-Approval
      ul certification
      TIIS
      csa