Dual Point Ultrasonic Level Switch with Self Test

Dual Point Ultrasonic Level Switch with Self Test

Models: 712, 722
Ranges: 0 to 2000 psi, 0 to 135 bar; -40° to 250°F, -40° to 121°C
Certifications: Unit: CSA, FM, RTN
Warranty: 3 Years

The SOR model 722 and 712 dual point with self test ultrasonic level switches are the perfect choice when you need an instrument with two set points for high and low alarms or pump control. The 722 model features a self test mechanism so you can be certain the device is still working even if there is no liquid present.  It’s a cost-effective, electronic instrument with no moving parts. Preventive maintenance is limited to an annual visual inspection and can be accomplished by a technician with basic electrical skills (wiring).

  • No additional set-up or calibration required
  • Set points can be linked to provide “pump-logic”
  • Pressure from vacuum to 2000 psi, temperature from -40°F to 250°F
  • Relay and current shift (8/16 mA) output available
  • 316SS, Alloy 20, and Hastelloy-C sensors

Datasheet

Ready to find out more?

Drop us a line today for a free quote!

Single Point Ultrasonic Level Switch

Single Point Ultrasonic Level Switch

Models: 701, 711 and 721
Ranges: 0 to 2000 psi, 0 to 135 bar; -40° to 250°F, -40° to 121°C
Certifications: Unit: CRN, CSA, FM, RTN
Warranty: 3 Years

The SOR 701 single point Ultrasonic level switch is a cost-effective level sensing solution for your applications. Preventive maintenance is a breeze requiring only an annual visual inspection because it is an electronic instrument with no moving parts. A technician with basic electrical skills (wiring) can service the instrument.

The popular 701 model ultrasonic level switch is compact, easy to install, economical and needs no calibration when it comes from the SOR factory.

  • Low cost
  • No calibration required
  • Pressure from vacuum to 2000 psi, temperature from -40°F to 250°F
  • Relay and current shift (8/16 mA) outputs available
  • 316SS sensor

Datasheet

Ready to find out more?

Drop us a line today for a free quote!

When your process calls for a point level measurement device, you can turn to SOR with confidence. Our ultrasonic Level switches are the ideal solution for simple applications. If you require a continuous output measurement, check out the SOR line of level transmitters.

Consistent operation under conditions where other Ultrasonic switches fail

  • Reliable, consistent performance
  • Versatile for a variety of applications
  • Low cost
  • Easy to install and use
  • Single or dual-point models available
  • CSA and FM certified

Installation assistance

  • SOR will aid you in installation to make certain your Ultrasonic device is good from the go – just give us a call when you’re ready

Worldwide service and fast delivery

  • Factory Sales Engineers and Representatives provide prompt service
  • Emergency shipments available upon request

Certifying Agencies

ATEX (certified by Baseefa, DEMKO, or KEMA)

CE

CSA

FM

GOST

IECEx (certified by Baseefa or Standards Australia)

INMETRO

PESO (CCOE – India)

TIIS

KOSHA

Rostechnadzor (RTN)

SIL, TestSafe (SAA – Australia)

SASO

UL

Available Listings

Ordinary Locations and Hazardous Locations
SIL Level Switch Certificate
SIL Pressure Switch Certificate

Available Hazardous Locations Protection Methods

Explosion Proof/Flameproof (d)
Intrinsic Safety (ia)
Encapsulation (m)
Special Protection (s)
Combustible Dust (tD)
Energy Limited (nL)

Division 1, Division 2
Class I, Class II, Class III
Groups A-G

IECEX
saso
INMETRO
kosha
gost
PESO
Testsafe
atex-certification
FM-Approval
ul certification
TIIS
csa