SOR Submersible Pressure Transmitters provide accurate and reliable pressure measurement in applications where equipment is either continuously or frequently immersed in fluids. They are manufactured from materials chemically compatible with most gases and liquids.

815LT Submersible Smart Level-Pressure Transmitter

HART
815LT Submersible Smart Level-Pressure Transmitter
815LT Submersible Smart Level-Pressure Transmitter

Models: 815LT
Ranges: 0-35 ft. w.c. to 0-575 ft. w.c.
Turndown: 5:1
Certifications: Unit: ATEX
Warranty: 3 Years

The 815LT submersible smart level-pressure transmitter is a rugged, compact, loop-powered instrument that is ideally suited for applications where the transmitter is frequently or continuously submerged in fluids. The transmitter’s vented cable design allows for reference to atmospheric pressure at all times in order to obtain highly accurate pressure or level readings. The 815LT is designed to measure gauge pressure or hydrostatic pressure for level output.

The 815LT is easily configured using HART®7 communication protocol and Modbus RTU Serial Communications. The transmitter can also be set by placing a magnet on the outside of the housing in order to reset the zero and span.

  • Compact, 316 Stainless Steel construction
  • IP68 housing Submersible up to 1200 feet
  • Cage option to protect sensor from solids and prevent build up
  • LCD remote mounted display option
  • HART®7 & Modbus RTU (RS-485) Communications available
  • Vent tube for reference to atmospheric pressure
  • 1-5 VDC (Low-Power) Mode of Operation
  • Configurable Normally-Open Solid-State Switch Output (SPST)
  • ±0.10% (URL) Continuous Output Accuracy
  • Turndown: 5 to 1
  • Zero and Span Magnetic Targets Located on Casting
  • EMC (EMI/RFI) Protection

Datasheet

Ready to find out more?

Drop us a line today for a free quote!

Immersible Fixed Range Pressure Transmitter

HART
Immersible Fixed Range Pressure Transmitter

Models: 510IM
Ranges: 5 to 2000 psi, 0.34 to 140 bar
Certifications: Unit: ATEX
Warranty: 3 Years

When flooding is a threat or when you need a pressure transmitter in non-corrosive water, the SOR 510IM pressure transmitter is the answer. This compact, loop-powered pressure transmitter accurately and reliably measures pressure on equipment that is either continuously or frequently immersed in fluids. The stainless steel pressure port and housing, viton o-ring seal and ceramic sensor make the wetted parts chemically compatible with most gases and liquids.

  • Suitable for continuous liquid immersion
  • Ranges from 5 to 2000 psi
  • Compact, 316SS housing
  • 0.25% accuracy
  • 4-20 mA, loop powered
  • Intrinsically Safe option
  • IP68 housing

Datasheet

Ready to find out more?

Drop us a line today for a free quote!

Certifying Agencies

ATEX (certified by Baseefa, DEMKO, or KEMA)

CE

CSA

FM

GOST

IECEx (certified by Baseefa or Standards Australia)

INMETRO

PESO (CCOE – India)

TIIS

KOSHA

Rostechnadzor (RTN)

SIL, TestSafe (SAA – Australia)

SASO

UL

Available Listings

Ordinary Locations and Hazardous Locations
SIL Level Switch Certificate
SIL Pressure Switch Certificate

Available Hazardous Locations Protection Methods

Explosion Proof/Flameproof (d)
Intrinsic Safety (ia)
Encapsulation (m)
Special Protection (s)
Combustible Dust (tD)
Energy Limited (nL)

Division 1, Division 2
Class I, Class II, Class III
Groups A-G

IECEX
saso
INMETRO
kosha
gost
PESO
Testsafe
atex-certification
FM-Approval
ul certification
TIIS
csa